Description
2018+ Dodge Smart Access Cable
Required hardware for many 2018+ Dodge, Jeep, RAM, and Chrysler applications using HP Tuners. This cable allows read, write, and certain special functions through HP Tuners VCM Suite, making it an important piece for supported late-model Stellantis tuning and diagnostics.
What It Does
- Enables read and write access on supported 2018+ Stellantis vehicles
- Supports certain special functions used in tuning and diagnostics
- Works with HP Tuners VCM Suite software
- Required to log ZF8-HP2 transmissions
Vehicle Coverage
- 2018+ Dodge
- 2018+ Jeep
- 2018+ RAM
- 2018+ Chrysler
- Use only on supported HP Tuners applications
Important Notes
- This is a hardware cable only
- Tuning interface, software, credits, and tune files are sold separately unless bundled
- Contact us before ordering if you are not sure your vehicle setup is supported
Basic Installation Overview
- Disconnect and isolate the negative battery terminal
- Locate the vehicle security module
- Remove the wider plug from the security module and connect it to the Smart Access Cable
- Plug the Smart Access Cable into the now-vacant port on the security module
- Reconnect the negative battery terminal
- Then connect your HP Tuners interface through the vehicle’s normal OBDII port
Who This Is For
This is for customers with supported 2018+ Dodge / Jeep / RAM / Chrysler vehicles that need the proper HP Tuners smart access hardware before tuning, scanning, or logging certain functions. If you are ordering tuning from us and are unsure whether you need this cable, send us your year, make, model, engine, and transmission first.
Questions?
Send us your vehicle details before ordering and we will confirm whether this cable is needed for your setup.
