GPEC PCM Unlock (2015+ Dodge, Ram, Jeep, Chrysler)

Description

2015+ GPEC PCM Unlock Service

Mail-in unlock service for GPEC, GPEC2, and GPEC2A PCMs used in Dodge, Ram, Jeep, and Chrysler vehicles. We unlock your original controller for OBD-II tuning with HP Tuners or DiabloSport. This service does not change the stock calibration.

Make sure this is your controller

• Controller: GPEC, GPEC2, or GPEC2A PCM. Compatibility is determined by the controller hardware and label, not model year alone.
• Vehicles: Commonly used in 2015+ Dodge, Ram, Jeep, and Chrysler applications.
• Common engines: 3.6L Pentastar, 5.7L HEMI, 6.4L HEMI, and 6.2L supercharged HEMI applications equipped with a supported controller.
• Common models: Charger, Challenger, Durango, 300, Grand Cherokee, Wrangler, Gladiator, Ram 1500/2500/3500, and other compatible applications.

What the $250 service includes

• Permanent unlock of your supplied compatible PCM for one selected tuning platform.
• Your stock calibration remains unchanged.
• Tracked return shipping within the United States.
• Typical 1–3 business-day shop turnaround after receipt.

This product does not include tuning, credits, a tuning device, or a security-bypass cable.

Choose your tuning platform

• Select HP Tuners or DiabloSport on the service request form.
• The unlock is platform-specific and cannot be switched later.
• Most 2018+ vehicles also require a compatible security-bypass cable for OBD-II flashing.

How mail-order service works

1. Purchase this service.
2. Complete the service request form using your order number.
3. Remove and securely package your PCM/ECM or module(s).
4. Send only the bare PCM/ECM or module(s). Before shipping, remove all plastic or metal brackets, mounting pieces, screws, wiring-harness gaskets, and other accessories. Extra pieces are not part of this service and may not be returned, so please keep them with the vehicle. PCM Tuners is responsible only for the module(s) sent for service.
5. We strongly recommend that you use the white 9" x 3" x 12" Pen+Gear brand boxes available at Walmart. They are strong, made in the USA, and cost about $1. Most GM ECM and PCM modules fit in these perfectly. Just add a bit of paper on the ends to prevent the module from sliding in the box during transit.
6. Ship it to
   PCM Tuners
   367 N Clarendon Ave, Unit 7
   [YOUR ORDER NUMBER] – Please don’t forget this. It really helps speed up order processing.
   Scottdale, GA 30079
7. We complete the service and return the controller(s) with tracking.

Before you remove the PCM

• Disconnect vehicle power and follow the correct service procedure for your application.
• Do not pry on the connectors. A small amount of isopropyl alcohol around a stubborn connector seal can help it release.