Description
Chrysler Dodge Jeep Ram ECM/PCM Programming
Mail-In Service for ECM/PCM Replacement (VIN Program a Used Module), Engine Modifications, and Performance Tuning
Did you replace a failed module on your Chrysler Dodge Jeep Ram like the ECM/PCM? Most of these vehicles have SKIM security issues and will not crank or start with a used module. We can program it to match your VIN so it will start and run. We can also unlock more power from your engine. We tune the HEMI, Pentastar, and the older 3.8, 4.7, 2.4, LA Series Magnum, and more. Typically anything 1998 and newer. Send us your ECM/PCM for fast, reliable modifications.
Contact Us
Feel free to contact us by text, email, or WhatsApp for questions or to confirm compatibility.
What Is This Service?
You remove the ECM/PCM from your vehicle and ship it to us. We program the VIN, handle the modifications, and ship it back quickly.
This service will program the VIN into a used module (make sure you match the original Module P/N – find it on a sticker on the module, the last 2 letters do not matter). If you are unsure, contact us before shipping. The SKIM (Sentry Key Immobilizer Module) in your vehicle will keep it from starting until the VIN is programmed.
CHOOSE FROM 3 OPTIONS
1) VIN PROGRAM ONLY
- This is the basic VIN program service (enables SKIM so the vehicle will start). No performance or calibration changes are included.
2) BASIC SERVICE – Good for Small Changes to Calibration – Includes
- VIN Programming
- MDS Off (if applicable)
- Variable Cam Delete/Disable (if applicable)
- Adjust Settings (eFan on/off temp setpoint, larger injectors, speed limiter removal, etc)
- Please complete the Custom Tune Order Form Form (link also in website main menu) if there are specific things you need
3) MORE POWER! – PERFECT FOR EXTRA PERFORMANCE ON DAILY DRIVERS OR BOLT-ON MODS – PREMIUM SERVICE
Includes everything in basic service above plus:
- We modify ignition timing, air fuel ratios, torque management, power enrichment, transmission shifting, and many more settings to get the most potential out of your setup.
- The result is more power, torque, MUCH better throttle response, and even a few MPG (if you can keep your foot out of it).
- Power gains are estimated and depend on your specific setup but are based on real world experience.
- 3.6L – 14 HP / 15 ft/lb TQ
- 5.7L – 22HP / 20 ft/lb TQ
- 6.4L – 25HP / 26 ft/lb TQ
📦 Shipping Instructions (To Send Your ECM/PCM to Us)
- Remove your ECM/PCM from the vehicle (YouTube University for your specific model if needed)
- Package securely
- Fill out the tune request from the Tune Request menu above (place the order first, you need your order # to complete the form) or include a note inside the box with:
- Answers to the form
- Phone number and email
- Order number
- Any custom requests (eFans enable, DTC off, etc.)
- USPS recommended for delivery to our secure locked mailbox at the shop, UPS & FedEx are ok too but sometimes they don’t leave the package and this causes a delay.
- Ship to:
PCM Tuners
367 N Clarendon Ave, Unit 7
Scottdale, GA 30079
⏱️ Turnaround Time
- VIN only is 1 business day (typical) after receipt
- VIN + Settings Adjust/Tune is 1–3 business days
- Return shipping via tracked carrier (we cover cost)
- Expedited/rush service available – options at checkout
Chrysler ECM programming, Dodge PCM programming, Jeep VIN programming, Ram PCM programming, FCA ECM programming, FCA PCM programming, SKIM delete, SKIM VIN programming, no start after PCM replacement, used PCM VIN flash, immobilizer programming, mail-in PCM service, performance tuning service.
3.6L Pentastar, 5.7L HEMI, 6.1L HEMI, 6.4L HEMI, 3.8L V6, 4.7L V8, 2.4L I4, and other FCA engines (typically 1998+).
Supported Vehicles:
Chrysler 300, Town & Country, Pacifica; Dodge Charger, Challenger, Durango, Ram 1500 / 2500 / 3500, Dakota; Jeep Wrangler, Grand Cherokee, Cherokee, Commander, Liberty, Compass, Patriot.
